Hardback : $249.00
Topics on CO2 sequestration and reduction in greenhouse gas emissions from process engineering and materials for clean energy are covered. Papers addressing sustainable technologies in extractive metallurgy, materials processing and manufacturing industries with reduced energy consumption and CO2 emission are also included, as well as industrial energy efficient technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery. The book also carries contributions from all areas of non-nuclear and non-traditional energy sources, including renewable energy sources such as solar, wind, biomass, etc. The book also emphasizes novel mineral beneficiation, processing, and extraction techniques leading to waste minimization of critical rare-earth materials used in energy systems (e.g., magnets, display and lighting devices).
Papers from the following symposia are presented in the book:
Topics on CO2 sequestration and reduction in greenhouse gas emissions from process engineering and materials for clean energy are covered. Papers addressing sustainable technologies in extractive metallurgy, materials processing and manufacturing industries with reduced energy consumption and CO2 emission are also included, as well as industrial energy efficient technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery. The book also carries contributions from all areas of non-nuclear and non-traditional energy sources, including renewable energy sources such as solar, wind, biomass, etc. The book also emphasizes novel mineral beneficiation, processing, and extraction techniques leading to waste minimization of critical rare-earth materials used in energy systems (e.g., magnets, display and lighting devices).
Papers from the following symposia are presented in the book:
Preface ix
Editors xi
Session Chairs xix
Energy Technologies and Carbon Dioxide Management
Session I
Reduction of CO2 Emissions by Chemical Synthesis Processes in
the Cement Industry 5
Juan Camilo Restrepo, Jorge Ivan Tóbon, and Oscar Jaime
Restrepo
Research on Greenhouse Gas Emission of Solid Dust Recovery Using
Rotary Hearth Furnace Process in China 13
Hong-Qiang Liu, Jian-Xun Fu, and Si-Yu Liu
Thermodynamic Analysis of Hydrogen Production from COG-Steam
Reforming Process Using Blast Furnace Slag as Heat Carrier 23
Wenjun Duan, Qingbo Yu, Junxiang Liu, and Qin Qin
CO2 Gasification of Catalysts-Loaded Petroleum Coke at Different
Grinding Medium 31
Zhengjie Chen, Wenhui Ma, Kuixian Wei, and Jijun Wu
Session II
Heat Recovery from High Temperature Slags: Chemical Methods
41
Yongqi Sun and Zuotai Zhang
Corrosion Fatigue of X46Cr13 in CCS Environment 49
Anja Pfennig, Marcus Wolf, and Thomas Böllinghaus
Power Generation by Organic Rankine Cycle from Low Temperature
Waste Heat of Metallurgical Industry 57
Xu Zhang, Hao Bai, Ning Li, and Xin Zhang
Preparation of Ti-Al-V Alloys by Aluminothermic Reaction 65
Zhijiang Gao and Huimin Lu
Long Term Prediction of Linz-Donawitz Converter Gas (LDG) in
Steel Making Process 73
Xiancong Zhao, Hao Bai, Qi Shi, Yang Wang, and Zhancheng Guo
Coke Modification Using Hydrothermal Oxidation Treatment 81
Quanqiang Ma, Huiqing Tang, and Huanyu Zhang
Optimization and Management of Byproduct Gas Distribution in
Steel Mills Under Time-of-Use (TOU) Electricity Price 89
Xiancong Zhao, Hao Bai, Qi Shi, and Zhancheng Guo
Session III
Preparation and Characterization of Stearic Acid/SiO2
Nano-encapsulated Phase Change Materials via Sol-gel Method 99
Huanmei Yuan, Hao Bai, and Yuanyuan Wang
Session IV
Reduction of GHG Emissions through the Conversion of Dairy Waste
to Value-Added Materials and Products 109
Caryn Wendt, Chaston Ellis, Donna Post Guillen, Kevin Feris, Erik
R. Coats, and Armando McDonald
Study on Preparing Ti6Al4V Alloys from V-Ti Bearing Beach
Placers 117
Zhijiang Gao, Huimin Lu, and Zegao Sun
Particles Flow Behavior Around Tubes in Moving Bed 125
Junxiang Liu, Qingbo Yu, Wenjun Duan, Zongliang Zuo, and Qin
Qin
Poster Session
Effect of Microwave Irradiation on Graphitization of Carbon
Matrix in Pulverized Coal 135
Pang Qing-hai, He Zhi-jun, Zhang Jun-hong, Zhan Wen-long, and Ning
Zhe
Effect of Microwave Irradiation on Improving Coal Grindability
145
He Zhi-jun, Pang Qing-hai, Zhang Jun-hong, Zhan Wen-long, and Ning
Zhe
High-Temperature Systems for Energy Conversion and Storage
Ceramic Reliability I
Thermomechanical Properties of Bilayer La2Zr2O7 Thermal Barrier
Coatings 155
Xingye Guo, Zhe Lu, Yeon-Gil Jung, Li Li, James Knapp, and Jing
Zhang
Recent Advancements in Solid Oxide Fuel Cell Technology II
An Improvement of SOFC Durability by the Mass Transport Analysis
at the Interfaces 163
Teruhisa Horita
Systems for Energy Conversion and Storage I
CH4 Reforming by CO2 and O2 Using Ni-M (M= Cu, Fe, Co, Mn, Zn,
Cr) Bimetallic Aerogel Catalysts 173
Tianzu Yang, Wei Chen, Lin Chen, Weifeng Liu, and Duchao Zhang
Electro-spraying and Combustion of Ethanol in a Micro-scale
Combustor under Combined Electric Field 181
Yunhua Gan, Yang Tong, and Xiaowen Chen
Author Index 189
Subject Index 191
Li Li, Cornell University.
Donna Post Guillen, Idaho National Laboratory.
Neale Neelameggham, Ind LLC.
Lei Zhang, University of Alaska Fairbanks.
Jingxi Zhu, Carnegie Mellon University,
Xuan Liu, Carnegie Mellon University.
Soumendra N. Basu, Boston University.
Nawshad Haque, CSIRO.
Tao Wang, Nucor Steel,
Dirk E. Verhulst, Extractive Metallurgy.
Amit Pandey, Rolls Royce LG Fuel Cell Systems Inc.
 |
Ask a Question About this Product More... |
|
